Your quick reference for all manuals and instructions — by Marco
Access it through this gate; you'll need the key fob to open it.
If you don’t have a spare key stored elsewhere (with a friend or at reception), contact the reception immediately. Their contact details are listed at the top of this page.
“When the transponder battery is low, short audible signals are heard in rapid succession on the locking cylinder (not the transponder) after the locking cylinder disengages each time the transponder is used.”To replace the battery, follow the steps in section 4:
Section 4 of the manual:
“The detector can be fully tested using the LED test button (fig. 8.1): battery test, electronic smoke chamber test and pulsating electronics test. Perform a test at least once a year and every time you replace the batteries. Press the test button (for up to 20 seconds) until a loud, pulsating alarm signal (c. 85 dB) can be heard. The test alarm automatically resets itself a few seconds after the test button has been released.”
“The device automatically performs a test approx. every 45 seconds which checks the pulsating electronics, voltage and battery internal resistance. The red LED flashes briefly (fig. 8.1) to indicate that this test is being performed.”
“If the 9 V battery supply falls beneath a certain value, the detector will emit an audible signal (approx. every 45 seconds), approx. 30 days before the battery needs to be replaced (see 3. Installation/Assembly/Connection).”
“If the device is faulty, the red LED will flash approx. every 45 seconds alternately with the audible signal. This indicates that the detector needs to be replaced.”
“When an alarm is triggered, the detector automatically resets itself if there are no longer any particles in the smoke chamber. The detector can also be switched off manually by removing the battery.”
You'll need the largest key to open the trash containers.
Next to Netto on Lehrter Str. (exact location).
You can donate your clothes at the Berliner Stadtmission (exact location).
For the tech-savvy: you may also create an issue or fork the repository on GitHub.